HS15HEC
High-Energy Coil
Heavy-Duty Ignition Coil
As much as 50,000 Volts to the Plugs!
HS15HEC High-Energy Coil
More turns of copper wire than other standard-sized canister coils
High secondary resistance (minimum of 12K Ohms) sends as much as 50,000 volts to the spark plugs
Heavy-duty, high-energy coil
Standard 56mm X 112mm canister size - fits stock-sized coil clamp
Primary resistance: 1.5 Ohms
Secondary resistance: 13K Ohms (twice as much as many coils)
Turn ratio 145:1
Primary inductance 2.3mH
Secondary inductance 36.1H
Solid, epoxy-filled canister (not oil-filled) for high-vibration environments
Three-way 1/4" brass male connectors on both terminals
Rugged, mirror-polished, stainless steel case won't chip or peel over time, like chrome-plated aluminum coil canisters
Designed specifically to produce maximum spark with Hot-Spark electronic ignition or points.
|
1.5 Ohms primary resistanceminimum of 12K Ohms secondary resistance |
||||||||||||
|
High secondary resistance for more voltage at the plugs Ideal for Use with Hot-Spark Electronic Ignition Conversion Kits with red ignition module |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 50,000 volts to the spark plugs - more turns
of copper wire than other standard-sized canister coils - twice as much as many
other coils.
Application:
Designed specifically to produce maximum spark
when used
with Hot-Spark red electronic ignition conversion kits
(red ignition module).
Also for points-based ignition systems
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished stainless steel case -
won't chip or peel like chrome-plated aluminum coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
3-way brass connectors on each
terminal
In Stock:
Available:
|
|||||||||||
|
||||||||||||
Know the primary resistance needed for your particular application — Please check
with the manufacturer of your HEI/CDI or electronic ignition system to make sure
that this is the correct ignition coil for your application before you buy.
Just a better idea.
© 2008
Hot-Spark Ignition Products
