HS06HEC
High-Energy Coil
Heavy-Duty Ignition Coil
As much as 50,000 Volts to the Plugs!
HS06HEC High-Energy Coil
More winds of copper wire than other standard-size canister coils
High secondary resistance (11.6K Ohms) sends as much as 50,000 volts to the spark plugs
Heavy-duty, high-energy coil
Standard 56mm X 112mm canister size - fits stock-sized coil clamp
Primary resistance 0.6 Ohms
Secondary resistance 11.6K Ohms
Turn ratio 135:1
Primary inductance 2.3mH
Secondary inductance 36.1H
Solid, epoxy-filled canister (not oil-filled) for high-vibration environments
Three-way 1/4" brass male connectors on both terminals
Rugged, mirror-polished, stainless steel case won't chip or peel over time, like chrome-plated aluminum coil canisters
Can also be used as a 6-volt coil for many applications.
|
0.6 Ohms primary resistance11.6K Ohms secondary resistance |
||||||||||||
|
Low primary resistance and high secondary resistance for more voltage at the plugs
|
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 50,000 volts to the spark plugs - the most
turns of copper wire in any standard-size canister coil.
Application:
HEI,
CDI and electronic ignition systems requiring a coil with 0.6
Ohms primary resistance. Can
also be used as a 6-volt coil for many applications.
Epoxy-filled canister
(not oil-filled) to withstand high-vibration environments Rugged, mirror-polished
stainless steel case - won't chip or peel like chrome-plated
aluminum coil canisters. Standard
56mm (2.2 in.) coil diameter - fits stock coil clamps.
3-way brass
connectors on each terminal
** Order the HS15HEC coil if to be used
with Hot-Spark ignitions, not the HS06HEC.
In Stock:
Available:
|
|||||||||||
|
||||||||||||
Know the primary resistance needed for your particular application — Please check with the manufacturer of your HEI/CDI or electronic ignition system to make sure that this is the correct ignition coil for your application before you buy.
Just a better idea.
© 2008
Hot-Spark Ignition Products
