HS17HEC
High-Energy Coil
Heavy-Duty Ignition Coil
As much as 50,000 Volts to the Plugs!
HS17HEC High-Energy Coil
More turns of copper wire than other standard-sized canister coils
High secondary resistance (12K Ohms) sends as much as 50,000 volts to the spark plugs
Heavy-duty, high-energy coil
Standard 56mm X 112mm (2.2 in. X 4.4 in.) canister size - fits stock-sized coil clamp
Primary resistance: 1.7 Ohms
Secondary resistance: 12K Ohms
Turn ratio 143:1
Primary inductance 2.36 mH
Secondary inductance 33-38 H
Solid, epoxy-filled canister (not oil-filled) for high-vibration environments
Three-way 1/4" brass male connectors on both terminals
Rugged, mirror-polished, non-corrosive case won't chip or peel over time, like chrome-plated coil canisters
Designed specifically to produce maximum spark with Hot-Spark electronic ignition or points.
International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
1.7 Ohms primary resistance 12K Ohms secondary resistance |
||||||||||||
|
High secondary resistance for more voltage at the plugs Ideal for Use with Hot-Spark 6- and 8-cyl Electronic Ignition Conversion Kits with red 3-series ignition module |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 50,000 volts to the spark plugs - more turns
of copper wire than other standard-sized canister coils - twice as much as many
other coils.
Application:
For 6- and 8-cylinder (3-series) electronic
ignition conversion kits
Designed specifically to produce maximum spark
when used
with Hot-Spark red electronic ignition conversion kits
(red ignition module).
Also for points-based ignition systems
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished case -
won't chip or peel like chrome-plated coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
In Stock:
Available:
|
|||||||||||
|
||||||||||||
Know the primary resistance needed for your particular application — Please check
with the manufacturer of your HEI/CDI or electronic ignition system to make sure
that this is the correct ignition coil for your application before you buy.
Foreign Orders: Shipping
discount available if purchasing multiple items.
Just a better idea.
© 2005-2011 HotSpark, LLC
